- Compatible with air turbine nozzles and all major brands of central vacuums including Beam, Electrolux, Eureka, Vacuflo, Vacumaid, MD, Cyclovac, Canavac, Hayden, Star Power, and Imperium. The hose is compatible with air turbine nozzles and 1.25 inches accessories of all types
- Permits remote activation of the central vacuum through the low volt contacts exposed in the inlet valve opening. It does not connect to 120 V power permitting the use of an electric power
- The lightweight highly flexible hose is made in the USA and is designed to power on and off the central vacuum power unit through industry standard pin jack inlet valves. The hose will work with standard accessories and any of the industry air turbine nozzles. It is not for use with an electric power nozzle
- The package comes with two floor nozzles. One is a multi-surface nozzle which works equally well on carpet and hard floor surfaces, while the other is a USA-made hard floor brush
- To confirm this package will work with your inlet valves you can confirm there are two small contact points located in your inlet valve on either the top half or bottom half of the inlet valve opening
- 35 Ft. hose allows more distance from the valve than many central vacuum packages
From the manufacturer
Crevice Tool
The crevice tool is excellent for getting into those tight and hard-to-reach spaces.
Upholstery Tool
The upholstery tool has a nylon brush strip and teeth that pull up and dislodge embedded dirt and debris for easy removal.
Dust Brush
Get into little crevices on surfaces with this Dust Brush. Will not leave marks on even the most delicate surfaces.
12″ Hard Floor Brush Attachment
The 12″ floor brush is excellent for cleaning any hard surface floor. Getting around furniture is made easier with the pivoting neck. The window cut across the face of the floor brush prevents bulldozing of debris and assures consistent airflow for faster pick-up of debris.
Central Vacuum Crevice Tool
Central Vacuum Upholstery Tool
Central Vacuum Dust Brush
12″ Hard Floor Brush
Handle & Hose Features
|
|
|
|
---|---|---|---|
Low Voltage Valve Hose EndThe low voltage valve hose end will have a wide metal band to accept low voltage power from the wall valve inlets. The low voltage does not allow for the use of powered nozzles. |
Low Voltage Wall ValveThe low voltage wall valve will have two prongs either on the top half or the bottom half of the valve opening. |
Low Voltage On/Off SwitchThe low voltage hose handle features an on/off switch to control the central vacuum. |
Air Relief ValveThe air relief valve allows you to control when or if the valve is open. Opening the air relief valve prevents the hose from suctioning to surfaces. |
|
|
|
---|---|---|
Multi-Floor NozzleThe tool is made for use on both hard and carpeted surfaces. It does not require any adjustment as it transitions from a hard floor to carpet, making it ideal for today’s homes where a single room may feature two surfaces. To protect hard floors from damage or marks, the tool has 2 large wheels mounted in the rear with a soft overmolded material where the wheels contact the surface. There are two wheels at the front of the tool which ensures the base of the tool remains elevated. A brush strip is designed to permit grooming of carpeted surfaces, opening the carpet fibers for easier capture of embedded dirt. Deep channels on both sides of the nozzle ensure airflow and effective edge cleaning. A lint strip helps to release fibrous debris such as hair, lint, or thread to be captured by the air stream. The tool’s neck pivots to maintain a parallel to the floor for more effective cleaning. The neck also pivots left and right to aid in steering the tool around obstacles and furnishings. |
Swivel HandleA swivel handle means less kinks in the cord and not having to bend or move. the cord as much to untangle. |