- Special Design:This whiped cream pressure regulator fill station has a working pressure gauge (left side) and cylinder pressure gauge (right side), which can show the pressure accurately and clearly. You can adjust the release to the desired gas pressure value at one time, you want through the regulating valve
- Attach to standard M11*1 Valve.
- Safe and reliable: Our pressure regulator valve is made of quality aluminum and copper material, which is sturdy, reliable, anti corrosion and rust proof, and can provide you with long time application.
- Easy to Use: Hand tighten to prevent leaks;Turn knob on front to increase or decrease pressure accordingly;Left gauge is output pressure.Right gauge is tank pressure;Recmmend 40-70 psi for most N2O dispensing applications.Runs longer than 10’may require higher pressures
- Wide Applications: suitable for 580g storage tank and 0.95L whipped cream chargers, suitable for large bubble cocktail parties, catering events, dessert cakes, etc.
Product Description
How to use:
1,Turn the adjuster knob to the looset status prevent the pressure gauge from exploding due to high pressure.
2, Make sure that there is a rubber ring inside the pressure reducing valve,it can prevent leakage
3,Screw pressure regulator into the nitric oxide tank.
4,Connect hose to cream dispenser and use wrench tighen it.
5,Connect hose to pressure regulator through quick fitting.(press the fitting to allow the hose to be inserted).
6,Turn the regulator knob slightly to achievethe desired pressure.Notice:The pressure adjustment can only be adjusted from 0 to high, not from high to low. If you want to re-adjust the pressure and the adjusted pressure is lower than the original set pressure, you need to vent the air and then re-adjust the pressure.